Cummins ISX15 CM2250 (2010-12) Fault Code: 418 PID: 97 SPN: 97 FMI: 15 Water-In-Fuel Indicator- Data Valid But Above Normal Operating Range- Least Severe Level

whatsapp +51955515985
support@ecuforcetruck.com
24/7 Customer Support

Shop

Account

Cart$0.00

Subtotal: $0.00

No products in the cart.

Circuit Description
The water-in-fuel sensor is attached to the fuel filter. The electronic control module (ECM) provides a 5 volt reference signal to the water-in-fuel sensor. When the water collected in the fuel filter covers the sensor probes, the water-in-fuel sensor pulls the 5-VDC reference voltage to ground, indicating high water accumulation in the fuel filter.

Component Location
The water-in-fuel sensor is integrated into the bottom of the OEM supplied suction fuel filter.

Conditions for Running the Diagnostics
This diagnostic runs continuously when the keyswitch is in the ON position.

Conditions for Setting the Fault Codes
The ECM detects that water in the fuel filter is above the sensor level.

Action Taken When the Fault Code is Active
The ECM flashes the amber CHECK ENGINE lamp indicating a maintenance condition immediately after the diagnostic runs and fails.
Conditions for Clearing the Fault Code
To validate the repair, start the engine and let it idle for 1 minute.
The fault code status displayed by INSITE? electronic service tool will change to INACTIVE immediately after the water has been drained from the fuel filter and the diagnostic runs and passes.
The ECM will turn off the flashing amber MAINTENANCE lamp after the diagnostic runs and passes.
The Reset All Faults command in INSITE? electronic service tool can be used to clear active and inactive faults.

Shop Talk
This fault code indicates that water has been detected in the water separation fuel filter. Drain the water from the fuel filter.

If this fault code is active and there is no water in the fuel filter, a malfunctioning Water-In-Fuel sensor is a likely cause.

Reference the appropriate OEM wiring diagram when troubleshooting circuits that utilize wiring supplied by the OEM.

For intermittent power supply and datalink communication issues with Aftertreatment Components, it is highly recommended that the OEM Power Distribution Center fuses and relays be thoroughly checked for loose, missing or intermittent connections.

Possible Cause:
1) ECM calibration

Categories Cumminz, DTC TRUCKS, ISX15 CM2250 (2010-12)Tags 15, 2010-12, 418, 97, Above, But, CM2250, Code, Cummins, Data, Fault, FMI, Indicator-, ISX15, Least, Level, Normal, Operating, PID, Range-, Severe, SPN, Valid, Water-in-Fuel

FacebookTwitterYoutube

Wiring Diagrams

Component Locators

Diagnostic Software PSI Powerlink 2.3.1
PSI Powerlink$94.00
Rated 0 out of 5
Allison doc premium update 2023 v1 Diagnostic Software Download
Allison$96.00
Rated 0 out of 5
Trucks software$55.00
Rated 0 out of 5
International Truck ISIS – Oncommand Service Information Q4.2020 [04.2020]
Navistar$85.00
Rated 0 out of 5
CAT ET Electronic Technician 2019C
CAT$40.00
Rated 0 out of 5

Eaton Service Ranger 4.9 Engineering 4.9 [05.2021] Engineering Level ( 1 PC )
Eaton$67.00
Rated 0 out of 5
CAT$200.00
Rated 0 out of 5
JCB ServiceMaster 4 v21.4.2 [05.2021] Diagnostic Software
JCB$85.00
Rated 0 out of 5
HINO EPC 2018 TRUCKS / BUSES 2018 EPC PARTS CATALOG
Hino$85.00
Rated 0 out of 5
Allison doc premium update 2023 v1 Diagnostic Software Download
Allison$96.00
Rated 0 out of 5
volvo delete files 2023 33,46 GB
Trucks software$300.00
Rated 0 out of 5
Wabco Diagnostic Software 2021 (Tebs-E 6.01) + PINS
Trucks software$60.00
Rated 0 out of 5
Cumminmms Insiter 8.9 Diagnostic Software
cummisznn$95.00
Rated 0 out of 5
Bendix 6.16 ACom Diagnostics ( bendix software trucks )
Bendix$35.00
Rated 0 out of 5
Nexiq eTechnician 2.0.7447 2020
NEXIQ$55.00
Rated 0 out of 5
VOLVO PREMIUM TECH TOOL PTT 2.7.116 + APCI 2021 + devtool ( ONLINE )
Trucks software$80.00
Rated 0 out of 5
Thermo King EPC 2012
Thermo King$45.00
Rated 0 out of 5
VOLVO PREMIUM TECH TOOL PTT 2.7.30 Developer + Devtool + INSTALATION VIDEO!
Trucks software$60.00
Rated 0 out of 5
Wabco PIN Code Calculator Diagnostic Software PIN 1 PIN 2
Trucks software$10.00
Rated 0 out of 5
CATERPILLAR FLASH FILE 2021 74 GB ( Collection 2021 ) sofware trucks
CAT$55.00
Rated 0 out of 5

Cummins ISX15 CM2250 (2010-12) Fault Code: 418 PID: 97 SPN: 97 FMI: 15 Water-In-Fuel Indicator- Data Valid But Above Normal Operating Range- Least Severe Level - EcuForce Truck (2024)

Related

Related products